Audio Impression

FS : A Pair of Krell Resolution 1 Floorstand Speaker (Used)

2010-07-15T03:38:00.000-07:00

For sale is a pair of used Krell Resolution 1 Floorstand Speaker
Condition : 8.5/10 (almost excellent condition)
Asking RM 28,000.00
Interested parties are welcomed to view the item at
Audio Impression - Lot 2.31, The Summit Subang USJ,
Tuesday to Sunday, 11:30am to 7:30pm
Contact : 012-3890 3333

Manual :
http://www.krellonline.com/assets/support/Resolution_MAN.pdf

Reviews :
http://www.stereophile.com/floorloudspeakers/1104krell/
http://www.stereotimes.com/speak010405.shtml

Amphion Impact 500 Active Subwoofer (New)

2010-05-20T03:37:00.000-07:00

Brand new set of Amphion Impact 500 Active Subwoofer for sale.
Interested prospects are welcome to audition at our outlet.
Contact : 03-8023 1601 (Roy / David)

Reviews :-
http://www.audioreview.com/mfr/amphion/subwoofers/impact-500/PRD_333648_2741crx.aspx

Web-link :-
http://www.amphion.fi/impact.html

Amphion Helium 520 Floorstand Speaker (New)

2010-05-20T03:30:00.000-07:00

Brand new pair of Amphion Helium 520 floorstand speaker for sale.
Interested prospects are welcome to audition at our outlet.
Contact : 03-8023 1601 (David / Roy)

Web-link :-
http://www.amphion.fi/helium520.html

Sonus Faber Grand Piano Domus (New)

2010-05-20T03:21:00.000-07:00

Brand new pair of Sonus Faber Grand Piano Domus for sale.
Interested prospect welcome to audition at our outlet.
Contact : 03-8023 1601 (David / Roy)

Reviews :-
http://www.audioenz.co.nz/2006/sonusfaber_grandpiano.shtml
http://www.techradar.com/reviews/audio-visual/hi-fi-and-audio/hi-fi-and-av-speakers/sonus-faber-grand-piano-domus-97515/review
http://www.audioreview.com/mfr/sonus-faber/floorstanding-speakers/domus-grand-piano/PRD_411050_1594crx.aspx

Web-link :-
http://www.sonusfaber.com/eng/collections_domus_granpiano.html

Eminent Technology : LFT-8b

2010-05-04T02:19:00.000-07:00

Planar Magnetic Hybrid Loudspeaker

The Eminent Technology LFT-8b is a hybrid, with push-pull, dynamic planar loudspeaker elements for the midrange and tweeter and a conventional cone loudspeaker for bass. The planar section is in a sense, the magnetic equivalent of a push-pull electrostatic loudspeaker, differing in that it requires no step-up transformer or bias voltage, and that the audio signal is applied directly to its diaphragm.

LFT-8b General Specifications:

Power Requirements             75 Watts Minimum

Sensitivity                    83 dB (pink noise, 20 - 20kH) at 1 watt/1 meter (2.83 V)

Frequency Response             25 Hz-50 kHz ±4 dB (typical room)

Phase Accuracy                 ± 20deg 100 Hz-31 kHz

High Frequency Level           Flat, - 6dB, -12dB at 20kHz smooth rolloff

Impedance                      Nominal 8 Ohm Rating

Maximum SPL                    105 dB at 1 meter

Dimensions                     13" Width by 60" Height by 1" Depth

Shipping Weight                65 lbs. Each

Warranty                       3 Years Parts, 1 Year Labor

Finish                         Oak Standard, Black Painted Oak or Walnut Optional

LFT-8b Panel SpecificationsMagnet Type                    Ceramic 8
Mid-Range Diaphragm Area       126 sq in
Foil Thickness                 .00033
Mylar Thickness                .0005
Laminate Adhesive Thickness    .00015
Gap Between Conductors         .03
Peak-to-Peak Diaphram          .180
Displacement
Tweeter Diaphragm area         10 sq in
Tweeter Peak to Peak           .050

LFT-8b Woofer Driver SpecificationsBox Volume                     23 Liters / 1403 in3 / .812 ft3
Speaker Diameter               8 inch
Magnet Weight                  1lb. 2oz
Impedance                      8 Ohms
DC Resistance                  6.65 Ohms
Inductance                     2.27 mH
Free Air Resonance             18 Hz ±15%

The Eminent Technology LFT-8b, ETI's first hybrid loudspeaker using the highly acclaimed Linear Field Planar Magnetic Transducers combined with a low Q 8" woofer in a sealed inclosure.
The magnetic drive principle developed by Eminent Technology for the LFT speaker series is unique to the industry. As the diaphragm of the speaker moves between the magnets following an audio signal, the magnetic field remains constant. In a sense, it is the magnetic equivalent of a push-pull electrostatic loudspeaker, differing in that it requires no step-up transformer or bias voltage and that the audio signal is applied directly to the diaphragm.
In order to obtain a uniform driving force over the entire surface area of the diaphragm, a low mass foil/mylar diaphragm is used with conductor traces etched (like a circuit board) with high resolution. The large surface area of the midrange driver gives excellent power handling capacity. A thin lightweight diaphragm is utilized for the high frequency driver.
The LFT-8b minimum recommended amplifier is 50 watts/channel. The maximum recommended power is 200 watts/channel. The speaker is moderately efficient and its impedance averages 8 ohms.
The low frequency woofer was carefully designed to blend seamlessly with the mid-range and high-frequency drivers. The design uses a very low crossover frequency (180Hz) between the woofer and midrange. The woofer has a very high complince and operates with a near critically damped system Q of .58. This tuning insures excellent transient response.
The panels are attached to a rigid steel frame to prevent resonances. The woofer is mounted in a rigidly braced enclosure.
The LFT-8b is biampable and uses the Edison Price Music Post. The standard finish is oak with black grills (shown), optional finishes are available for an additional charge.
Product Link Page and Reviews :-
http://www.eminent-tech.com/lft8prod.html

CODA TECHNOLOGIES Inc. : CSi-Balanced

2010-05-04T01:31:00.000-07:00

Audio Impression is proud to present CODA CSi-Balanced Integrated Amplifier (330W : 8 Ohm / 600W : 4 Ohm)

The CSib is an integrated amplifier which marries the performance of the CS stereo amplifier with a streamlined preamplifier design derived from the CL. This provides a single-unit audio solution for a compact system. Included remote allows control of all functions.

330 Watts per channel into 8 Ohms
600 Watts per channel into 4 Ohms
Class A operation to 5W
State-of-the-art, remote-controlled "seperates" performance with the added benefit of balanced audio inputs for even greater audio quality.
Preamplifier section derived from the Coda 05X design, utilizing the PGA2320 digitally-controlled precision analog attenuator. Component upgrades include PRP audio resistors, Black Gate and Multicap capacitors, and high speed rectifiers for the preamp power supply
Coda CSX Precison Bias Class A/AB amplifier design, with discrete JFET differential input stage, VMOSFET voltage gain DC coupled to an ultra wideband bipolar output stage.
Fully discrete amplifier FET differential input stage DC coupled to an ultra wideband bipolar output stage
No overall feedback
Separate tape monitor and processor loops
Stereo subwoofer output
Wideband, fully-regulated power supply with EMI and RFI line filtering
10 year warranty / 5 year transferable
Designed, manufactured and assembled in the USA

Review :

http://hifiireland.com/hi-fi-reviews/integrated-amplifiers/coda-csib/

Homepage :

http://www.coda-continuum.com/about/index.php

Product Link :

http://www.coda-continuum.com/product/index.php

Interested parties are welcome to audition at :

Audio Impression

Lot. 2.31, Level 2,

The Summit Subang USJ,

Jln Kewajipan USJ1,

UEP Subang Jaya, 47600

Selangor D.E.

Tel : +603 8023 1601 / +6012 3890 333

E-mail : audio.impression@yahoo.com

Roy / David will be happy to assist